Restoration Supply Company
15182-B Highland Valley Rd.
Escondido, CA 92025
info@restorationstuff.com
Order Desk Toll Free: 800-306-7008
Other Inquiries or Outside the US: 1-760-741-4014







"The Right Stuff"

Belting




Product Image Item Name- Price
BEL012

BEL012

Spring Belting This is the correct belting for your spring drive pulleys. This continuous spring can be cut to fit your application. Use a spring connector that screws inside the continuous spring on each end and then join the two connectors together to make one continuous loop. Belting is sold by the foot and the connectors are sold individually, two connectors are required to make the loop. 3/8" Belt Connector
$6.00

Add:

BEL011

BEL011

Spring Belting This is the correct belting for your spring drive pulleys. This continuous spring can be cut to fit your application. Use a spring connector that screws inside the continuous spring on each end and then join the two connectors together to make one continuous loop. Belting is sold by the foot and the connectors are sold individually, two connectors are required to make the loop. 3/8" Spring Belt
$17.00

Add:

BEL009

BEL009

Spring Belting This is the correct belting for your spring drive pulleys. This continuous spring can be cut to fit your application. Use a spring connector that screws inside the continuous spring on each end and then join the two connectors together to make one continuous loop. Belting is sold by the foot and the connectors are sold individually, two connectors are required to make the loop. 5/16" Belt Connector
$6.00

Add:

BEL008

BEL008

Spring Belting This is the correct belting for your spring drive pulleys. This continuous spring can be cut to fit your application. Use a spring connector that screws inside the continuous spring on each end and then join the two connectors together to make one continuous loop. Belting is sold by the foot and the connectors are sold individually, two connectors are required to make the loop. 5/16" Spring Belt
$17.00

Add:

BEL010

BEL010

Link Belt - Black Specifically designed for V-belt drives in which a one piece belt cannot be installed, link belt is similar to “take apart” belts used in the teens and 20’s. Length can be easily increased or decreased by adding or removing individual links. Measure width of “V” at outermost edge of pulley; 21/32” is the most common size. Sold by the foot. Black 21/32"
$24.00

Add:

BEL006

BEL006

Link Belt - Black Specifically designed for V-belt drives in which a one piece belt cannot be installed, link belt is similar to “take apart” belts used in the teens and 20’s. Length can be easily increased or decreased by adding or removing individual links. Measure width of “V” at outermost edge of pulley; 21/32” is the most common size. Sold by the foot. Black 1/2"
$23.00

Add:



Your IP Address is: 35.153.135.60